AS-225 max - Streaming-Set
Available, delivery time: 1-3 working days *
€0.00
07171 87 12 0
Details
The products and extras at a glance
- nuPro AS-225 max
- Suitable network player (selectable)
- Suitable audio cables (optional)
- Warranty extension to 5 years (only applies to Nubert amplifiers, Nubert active loudspeakers and Nubert subwoofers)
(optional)
Elegant in acoustics and appearance
Our soundbar - the nuBoxx AS-225 max - is also available as a set with matching accessories, with or without audio cable as required
nuBoxx AS-225 max - small soundbar plays big
The nuBoxx AS-225 max enhances the sound of your TV. With its lower cut-off frequency of 36 Hz, you get enough foundation for action scenes with pleasant and easily understandable voices. Thanks to one analogue, three digital and one Bluetooth interface as inputs, it is possible to connect additional sources in no time at all. The speaker is controlled using the infrared remote control with metal surface included in the scope of delivery. Alternatively, control is possible via HDMI eARC. The nuBoxx AS-225 max can play the latest series and films with Dolby codec directly. The Voice+ speech optimisation function, which makes difficult-to-understand dialogue a thing of the past, the Wide function for more stereo width and the adaptive loudness ensure customised sound. In addition, bass and mids/treble can be adjusted independently of each other
In this set, the elegant nuPro AS-225 max soundbar is now available in various network player combinations.
Put together your individual set now, optionally with a matching analogue or digital audio cable.
A warranty extension to 5 years is also available as an option.
This set therefore offers all ambitious music fans the optimum equipment for affordable hi-fi audio enjoyment and leaves nothing to be desired.
Safety Instructions
Nubert electronic GmbH
Nubertstraße 1, 73529 Schwäbisch Gmünd, Deutschland
Email: info@nubert.de Phone: +49 07171 - 8712-0
Before connecting and operating the device, carefully read the user manual, particularly the safety instructions. For your own safety, strictly observe all warning and safety notices in this manual and on the speaker. No work on the speaker other than the actions described here should be performed by the user. Keep this document accessible at all times and hand it over to any future owners.
Intended Use
This speaker is designed exclusively for audio playback in dry indoor environments. Use the speaker only as described in this manual. Any other use (especially safety-critical or medical applications, outdoor installation like specifically IP-certified products) is considered improper and may result in property damage or personal injury. Nubert electronic GmbH accepts no liability for damages resulting from improper use.
General Notes
Never operate the speaker unattended!
Risk of suffocation!
Never allow children to use the speaker unattended or play with its packaging! There is a risk that children may become entangled in the packaging film and suffocate. Ensure that children cannot detach small parts from the devices! These parts could be swallowed, leading to choking hazards. In case of ingestion, contact a doctor immediately!
Caution!
To avoid the risk of property damage, the speaker must not be opened by the operator. There are no user-serviceable parts inside the speaker. Maintenance and repairs should be performed only by authorized, qualified professionals from Nubert. In case of service needs, contact Nubert electronic GmbH directly!
Caution!
If the speaker is operated despite damage, further defects may occur. If any of the following conditions arise, immediately discontinue use of the speaker and contact Nubert electronic GmbH:
- The speaker has been damaged or has fallen.
- Objects or foreign substances have entered the device.
- The speaker emits a burning smell, smoke, or unusual noises.
Placement Instructions
Risk of injury or damage!
Move the speaker with care to avoid injuries or damage!
Caution!
An unstable placement location can lead to damage to the speaker.
- Place the speaker on a level, stable surface and ensure it cannot be tipped over!
- Ensure that no accidental tension is applied to the cables to prevent the speaker from tipping over or damaging the connection ports!
- Keep the speaker away from strong mechanical shocks!
Caution!
Excessive heat build-up inside the device can shorten its lifespan or lead to a fire. Heat exposure on the speaker surfaces can cause damage.
- Do not operate the speaker near heat sources such as radiators or stoves!
- Do not expose the speaker to direct sunlight!
- Never place burning candles or similar open flames on the speaker!
Caution!
Moisture can damage the speaker.
- Use the speaker only in a dry environment!
- Do not operate it outdoors or in damp rooms!
- Protect the speaker from all types of liquids, including dripping or splashing water.
- Do not place containers with liquids (e.g., flower vases) on or near the speaker!
- If the speaker is brought from a cold environment into a warm room, condensation may form inside the device. Wait at least 6 hours before turning it on to ensure it has reached room temperature and is dry!
- Do not use the speaker during rapid temperature changes!
Placement Instructions
Risk of injury or damage!
Move the speaker with care to avoid injuries or damage!
Caution!
An unstable placement location can lead to damage to the speaker.
- Place the speaker on a flat, stable surface and ensure it cannot be knocked over!
- Make sure there is no unintended tension on the cables to prevent the speaker from tipping over or damaging the connection ports!
- Keep the speaker away from strong mechanical shocks!
Caution!
Excessive heat buildup inside the device can shorten its lifespan or lead to a fire. Heat exposure on the speaker surfaces can cause damage.
- Do not operate the speaker near heat sources such as radiators or stoves!
- Do not expose the speaker to direct sunlight!
- Never place burning candles or similar open flames on the speaker!
Caution!
Moisture can damage the speaker.
- Use the speaker only in a dry location!
- Do not operate it outdoors or in damp rooms!
- Protect the speaker from any liquids, including dripping or splashing water.
- Do not place containers with liquids (e.g., flower vases) on or near the speaker!
- If the speaker is brought from a cold environment into a warm room, condensation may form inside the device. Wait until the speaker reaches room temperature and is dry before turning it on!
Connection Instructions
General Connection Instructions
- Unplug all devices in your system from the power supply before making any wiring changes!
- Ensure that all connections are made correctly and that all plugs are firmly seated in their sockets before reconnecting the devices to the power supply!
- Only use the designated cables and connectors for connections! Otherwise, damage or malfunctions may occur.
- When disconnecting the speaker, always pull on the plug, not the cable!
- Ensure that all plugs are securely seated in their sockets!
- Only use cables and accessories recommended by Nubert!
Caution!
Disconnect your amplifier/receiver from the power supply before connecting your speakers! Refer to the amplifier/receiver's user manual for instructions on connecting speaker cables.
Care and Cleaning Tips
Caution!
Improper handling of the speaker may cause damage.
- Always unplug the power cord before cleaning the speaker!
- Ensure that all connections are correct, there are no short circuits, and the speaker is completely dry before resuming operation.
- Do not use harsh cleaning agents or solvents such as gasoline, alcohol, or similar substances!
Housing
We recommend using a standard glass cleaner sprayed onto a cotton cloth. This allows most fingerprints and dirt to be removed easily. Alternatively, you can use window active foam. We advise against using microfiber cloths as they may cause micro-scratches on the surface.
Membranes and Speaker Drivers
To remove dust from a speaker driver, use a lint-free cotton cloth and gently wipe the membrane with very light pressure. All Nubert speakers' tweeters are protected by a grille, which can also be wiped lightly with minimal pressure. If the dust cannot be completely removed, a makeup brush from the drugstore can be used.
nuBoxx AS-225 max
Intended Use
This speaker is exclusively intended for audio playback in dry indoor spaces. Use the speaker only as described in this manual. Any other use (especially safety-critical or medical applications, outdoor installation unless specifically IP-certified) is considered improper and may lead to damage or even personal injury. Nubert electronic GmbH assumes no liability for damages resulting from improper use.
Safety Instructions
Before connecting and operating the device, read the entire manual, especially the safety instructions, thoroughly. For your safety, always observe all warning and safety notices in this manual and on the speaker. Do not perform any work on the speaker beyond the described procedures. Keep this document accessible at all times and pass it on to any subsequent owner.
General Notices
Never leave the speaker unattended while in use!
Risk of Electric Shock!
To avoid the risk of electric shock, the speaker must not be opened by the user. There are no user-serviceable parts inside. Repairs and service work must be carried out only by authorized, qualified professionals. For service inquiries, contact Nubert electronic GmbH (info@nubert.de).
Risk of Suffocation!
Never allow children to use the speaker or remote control unsupervised or to play with the packaging! There is a risk that children could become entangled in the plastic wrapping and suffocate. Ensure that children cannot detach small parts from the devices! These parts, as well as the battery of the remote control, could be swallowed, posing a choking hazard. In case of ingestion, consult a doctor immediately!
Risk of Injury or Damage!
When moving the speaker, exercise caution to prevent injuries or damage. Caution! As the speaker can only be completely disconnected from the power supply via the rear power input or by unplugging the power cord, it must be positioned to allow free access to these. If any of the following issues occur, immediately disconnect the speaker from the mains and contact Nubert electronic GmbH (info@nubert.de):
- The speaker has been damaged or has fallen over.
- The power cable or plug is damaged.
- Objects or liquids have entered the speaker.
- The speaker has been exposed to excessive moisture or rain.
- The speaker is not functioning properly or has significantly reduced performance.
- The speaker smells burnt, emits smoke, or produces unusual noises.
Use only accessories recommended by Nubert!
Placement Instructions
Caution!
An unstable placement location can damage the speaker.
- Place the speaker only on a flat, stable surface, and ensure it cannot be tipped over!
- Ensure no accidental tension is applied to the cables to prevent the speaker from tipping over or the connectors from being damaged!
- Keep the speaker away from strong mechanical shocks!
Caution!
Excessive heat buildup inside the device can reduce its lifespan or cause a fire.
- Do not cover the back of the speaker! Ensure at least 10 cm of clearance and sufficient airflow around the rear of the speaker!
- Do not place the speaker or remote control near heat sources such as radiators or stoves!
- Do not expose the speaker or remote control to direct sunlight!
- Never place burning candles or similar open flames on the speaker!
Risk of Explosion!
Placing the speaker or remote control in unsuitable environments may cause explosions. Do not use the speaker or remote control:
- In fire- or explosion-prone areas.
- At extremely low or high temperatures.
- Near flammable gases or vapors.
- Near heavy dust.
- Near flammable materials.
Caution!
Power surges (e.g., due to lightning strikes) can damage or destroy the device and power supply.
- A surge protection device can provide some protection against high voltage in the power grid.
- Maximum safety can only be ensured by completely disconnecting your devices from the power grid and antenna systems. During thunderstorms or lightning threats, unplug the power cord from the outlet and disconnect any antenna cables from your HiFi system!
- If the speaker is not in use for an extended period or left unattended, the power supply should be disconnected by unplugging the power cord.
Remote Control and Battery
This product includes a remote control and a battery. Observe the following when handling these components:
- If the batteries are discharged, the range of the remote control will significantly decrease. Replace the batteries immediately in such cases.
- Always use high-quality lithium coin cells of type CR2025 as replacement batteries.
- When inserting the battery into the compartment, ensure correct polarity by observing the + and – signs inside the battery compartment!
Caution!
Improper handling can cause damage.
- Do not drop the remote control!
- Do not expose the remote control or battery to water or other liquids!
- Do not operate or store the remote control and battery in locations with high humidity or extremely high or low temperatures!
Danger!
Leaking or exploding batteries can pose a health hazard and cause property damage.
- If the device is not used for an extended period or if the batteries are depleted, remove the batteries from the remote control to prevent discharge, leakage, or explosions.
- Replace leaking batteries immediately.
- If you find a leaking battery, do not touch the leaked material and dispose of the batteries immediately!
- Do not touch leaking batteries!
- If leaked material comes into contact with your skin, eyes, or mouth, rinse the affected area thoroughly with water and contact a doctor immediately!
Risk of Internal Chemical Burns!
Swallowing batteries can cause severe internal burns within a short time and may lead to death.
- Ensure that batteries do not enter your body in any way, especially not by swallowing!
- Keep new and used batteries away from children.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you suspect that batteries have been swallowed, inserted into the body, or placed in any body opening, contact a doctor immediately!
Cambridge Audio MXN10/AXN10
Hersteller: Audio Partnership Plc
Adresse: Gallery Court, Hankey Place,
SE1 4BB London United Kingdom
Hersteller: Cambridge Audio Deutschland
Adresse: Mönckebergstr. 27
20095 Hamburg
Germany
Website: www.cambridgeaudio.com
Bluesound NODE
Hersteller: The Lenbrook Group Head Office
Adresse: 633 Granite Court
Pickering, Ontario, Canada – L1W 3K1
Website: www.bluesound-deutschland.de
E-Mail: info@lenbrook.com
Bluesound products are distributed in Germany by DALI GmbH:
Vertrieb: DALI GmbH
Adresse: Berliner Ring 89
64625 Bensheim Deutschland
Website: www.bluesound-deutschland.de
E-Mail: info@bluesound-deutschland.de
CAUTION
To completely disconnect this device from the power supply, please unplug the power cord from the wall outlet. The power plug is used to completely disconnect the device from the power supply; it must remain easily accessible for the user.
WARNINGS
- Avoid high temperatures. Ensure proper ventilation if the device is placed on a shelf.
- Handle the power cord carefully. Always hold the plug when unplugging the cord.
- Keep the device away from moisture, water, and dust.
- If the device will not be used for an extended period, disconnect the power cord from the outlet.
- Do not cover the ventilation area.
- Do not allow foreign objects to enter the device.
- Keep the device away from insecticides, gasoline, or thinners.
- Never attempt to disassemble or modify the device.
- Ensure ventilation is not obstructed by objects such as newspapers, tablecloths, curtains, etc.
- Do not place any open flames, such as lit candles, on the device.
- Please follow local environmental regulations when disposing of batteries.
- The device must not be exposed to dripping or splashing liquids.
- Do not place any containers filled with liquid, such as vases, on the device.
- Do not handle the power cord with wet or damp hands.
- When the switch is in the OFF-STANDBY position, the device is not completely disconnected from the mains.
- The device should be positioned near a power outlet to ensure easy access to the power supply.
- Do not store the battery in a location exposed to direct sunlight or extremely high temperatures, such as near a heater.
- Do not forcibly bend the plug when connecting the device and the micro-USB/USB cable.
CAUTION (For Amplifiers): Hot Surface. Do Not Touch.
The surface above the internal heatsink may become hot when this product is operated for extended periods. Do not touch hot areas, particularly near the "Hot Surface Mark" and on the top surface.