nuVero 170 Almost Good
Available, delivery time: 1-3 working days *
€3,555.00
07171 87 12 0
Product
nuVero 170
- Reference floorstanding loudspeaker with absolute high-end detail reproduction
- 23 Hz bass response guarantees bass like in an orchestra in your own four walls without a subwoofer
- Triple D'Appolito arrangement for a wide sweet spot with optimal stage presentation
- Four ways - one goal: faithful reproduction of your favourite music
- Convincing with sound selector switch, bi-wiring terminal and asymmetrical tweeter
- Made in Germany, nobly lacquered, incl. sound sail for optimal reproduction, with stainless steel cross bar
1st choice
In terms of equipment and function, the 2nd choice does not differ from the 1st choice products. The warranty and return policy are also identical. More info and detailed data can be found on the 1st choice product website.
Details
2nd choice
Our 2nd choice items are demonstration units, discontinued models in their original packaging or customer returns. The optical defects of the 2nd choice are no longer visible from a distance of two metres. Technically, all 2nd choice products are subject to extensive quality testing and are in no way inferior to 1st choice. The guarantee and return policy is also identical to our 1st choice.
Nubert electronic GmbH
Nubertstraße 1, 73529 Schwäbisch Gmünd, Deutschland
Email: info@nubert.de Phone: +49 07171 - 8712-0
- Turn off the amplifier before connecting the speaker cables.
- Place the speaker only in a dry location.
- Do not expose the speakers to direct sunlight.
- Overload: The nuVero 170 is equipped with internal fuses to protect against amplifier-induced overload. However, even a weak amplifier can damage the speaker. At high volume levels, weak amplifiers tend to distort, putting extreme stress on the tweeters. If the sound becomes distorted, reduce the amplifier's volume immediately.
- Tipping Hazard: The nuVero 170 should never be set up without the supplied traverse feet! Due to its tall design, there is a risk of the speaker tipping over sideways without the proper support.
- Warning: The nuVero 170 can produce maximum sound levels that, when listened to for prolonged periods, may cause permanent hearing damage. Volume settings are at the user's own risk. Nubert accepts no liability for hearing damage resulting from improper use.
Cold Weather and Sound
If speakers are delivered during cold weather, they must acclimate to the room's temperature. Low temperatures significantly affect the movable parts of a speaker, such as the diaphragm/voice coil, surround, and spider. These components' ability to handle rapid vibrations or large movements is reduced. While this is not harmful, "frozen" speakers cannot perform at their best.
Tip: If your speakers arrive on a cold winter day, let them acclimate for a few hours before use. Your Nubert speakers will deliver the outstanding sound quality you expect once they are at room temperature.
Setting Up the Speaker
Detailed instructions for unpacking and setting up the nuVero 170 can be found in the accompanying DIN-A3 instruction sheet.
Due to the heavy weight of the nuVero 170, always handle it with two people! After unpacking the speaker and attaching the traverse feet, remember to protect your flooring by placing cardboard or similar material under the edges of the base feet before setting it upright.
- Take one of the corner protectors from the packaging.
- Slide it under the lying speaker so the traverse foot rests against the corner protector.
- Carefully tilt the speaker over the corner protector until it stands securely. Then gently remove the cardboard strips.
Connection Instructions
Ensure that your amplifier/receiver is turned off before connecting the speakers. Refer to the user manual of your amplifier/receiver for detailed instructions on how to connect the speakers properly.
Care and Cleaning Tips
Caution!
Improper handling of the speaker can cause damage.
- Turn off your amplifier before cleaning the speaker and disconnect the speaker cables if necessary.
- Ensure all connections are correct, no short circuits are present, and the speaker is completely dry before powering on.
- Never use harsh cleaning agents or solvents like gasoline, alcohol, or similar substances.
Cabinet
For nuVero cabinets with Nextel® design lacquer surfaces, we recommend using standard glass cleaner sprayed onto a cotton cloth to remove fingerprints and dirt effectively. Alternatively, window cleaning foam can be used. Avoid microfiber cloths as they may cause small scratches on the surface.
Membranes and Speaker Chassis
Use a lint-free cotton cloth to gently remove dust from a speaker diaphragm. All Nubert tweeters are protected by grilles, allowing them to be wiped lightly. For stubborn dust, a makeup brush from a drugstore may be used.
Stands and Traverses
For cleaning stainless steel surfaces, plant gloss spray has proven to be an excellent choice. Rub or polish it in with a cotton cloth.
Listen to it now in our stores!
Test results
We are awarded. And proud of it.
Accessories
We not only build exceptional loudspeakers and electronics, but also offer the matching accessories. So you can find everything useful for our products, from cables to adapters.
Content: 6 Meter (€6.00 / 1 Meter)
Our recommendations
Not the right one? We recommend taking a look at related products that you might like.
Downloads
Technical information
| Device type: | Floorstanding loudspeaker |
|---|---|
| Width: | 24,5 cm |
| Height: | 168,5 cm |
| Depth: | 46,0 cm |
| Width (additional information): | 33,5 cm (with traverse) |
| Height (additional information): | 170,0 cm (with traverse) |
| Weight: | 70,9 kg |
| Packaging dimensions (W x H x D): | 184,0 cm x 39,0 cm x 60,0 cm |
| Shipping weight: | 83,0 kg |
| Standard colour: | Black |
| Color: | Diamond Black |
| Scope of delivery: | nuVero 170, height-adjustable disc feet for a secure stand, speaker cable 2x 0.75 mm² 4 m, operating instructions in German |
| Country of origin: | Germany |
| WEEE-Reg. No.: | DE 48888173 |
| Construction Method: | Bass reflex |
| Construction: | Direct radiator |
| System: | 4-way |
| Tweeter: | 1x 26 mm |
| Tweeter material: | Silk fabric |
| Tweeter crossover frequency: | 2.000 Hz |
| Midrange speaker: | 2x 52 / 112 mm |
| Midrange crossover frequency: | 450 Hz |
| Bass-midrange driver: | 2x 150 mm |
| Bass-midrange material: | Glass fibre composite |
| Trennfrequenz Tiefmitteltöner: | 160 Hz |
| Woofer: | 3x 220 mm |
| Woofer material: | Glass fibre composite |
| Lower cut-off frequency (-3 dB): | 23 Hz |
| Upper cut-off frequency (-3 dB): | 25.000 Hz |
| Efficiency (2.83V/1m): | 88,0 dB |
| Efficiency (1W/1m): | 85,0 dB |
| Continuous load capacity: | 480 W |
| Pulse load capacity: | 650 W |
| Shielding: | Magnetically compensated |
| Impedance: | 4 Ohm |
| Protection: | Self-resetting fuses |
| Tone selector switch Treble: | Yes |
| Mid tone selector switch: | Yes |
| Tone selector Low: | Yes |
| Loudspeaker inputs: | 2 |