Skip to main content Skip to search Skip to main navigation
+49 (0)7171 8712 0 info@nubert.de
Go to homepage

Product


Integrated stereo amplifier

The beating heart of the EX, our EXA100 integrated amplifier, has been three years in the making. More than a thousand working days at our London headquarters have resulted in a huge increase in power and performance. An amplifier for the modern age, lovingly Made By Music.

Header nuBoxx

Cambridge Audio EXA 100

  • Unadulterated digital audio
  • Exceptional signal purity
  • Storage capacitor for deep, dynamic performance
  • Intelligent protection with CAP
  • Powerful heat sinks

Details


Cambridige Audio EXA 100 PDS 1

In a completely different league

Thanks to the trickledown technology of our flagship Edge M monoblock power amplifier, the EXA100 with its 100 W of wonderfully refined Class AB amplification can drive even high-end loudspeakers with ease.

A legacy of innovation

Our P40 amplifier from 1968 was the first with a toroidal transformer and changed the hi-fi world forever. The EXA100 continues this legacy with a shielded, ultra-quiet toroidal transformer flanked by high-performance heat sinks, delivering impeccable performance worthy of the P40 name.

Cambridige Audio EXA 100 PDS 2
Cambridige Audio EXA 100 PDS 3

Flexible connectivity

With the EXA100, you can listen the way you want. Balanced XLR inputs provide a first-class analog connection, while two sets of speaker outputs can play music in two different rooms. Bass lovers can even connect a subwoofer via the dedicated pre-out. The possibilities are endless.

(Quelle: www.cambridgeaudio.com)

Safety Instructions


Responsible person

Cambridge Audio (EU) Limited

Address

First Floor, Penrose 1, T23 KW81 Cork, Ireland

Contact

Email: compliance@cambridgeaudio.com

For your own safety please read the following important safety instructions carefully before attempting to connect this unit to the mains power supply. They will also enable you to get the best performance from and prolong the life of the unit:

  1. Read these instructions.
  2. Keep these instructions.
  3. Heed all warnings.
  4. Follow all instructions.
  5. Do not use this apparatus near water.
  6. Clean only with a dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
  10. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles and the point where they exit from the apparatus.
  11. Only use attachments/accessories specified by the manufacturer.
  12. Use with only the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/ apparatus combination to avoid injury from tip-over.
  13. Unplug this apparatus during lightning storms or when unused for long periods of time.
  14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as the power-supply cord or plug having been damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

WARNING:

  • Do not place the unit in an enclosed space; if you wish to place the unit on a shelf, use the top shelf to allow maximum ventilation. Do not put any objects on top of this unit. Do not situate it on a rug or other soft surface and do not obstruct any air inlets or outlet grilles. Do not cover the ventilation grilles with items such as newspapers, tablecloths, curtains, etc.
  • To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture . This unit must not be used near water or exposed to dripping or splashing water or other liquids. No objects filled with liquid, such as vases, shall be placed on the unit.
  • Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
  • The battery (battery pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like.
  • The unit must be installed in a manner that makes disconnection of the mains plug from the mains socket outlet (or appliance connector from the rear of the unit) possible. Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable.
  • Please refer to the information on the exterior rear panel for electrical and safety information before installing or operating the apparatus.
  • Only use the mains cord supplied with this unit.

Use of the apparatus in tropical climates - The equipment shall be used at a maximum 45 degree C ambient temperature. The unit is of Class 1 construction and must be connected to a mains socket outlet with a protective earthing connection.

The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated ‘dangerous voltage’ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the service literature relevant to this appliance.

WEEE SYMBOL

The crossed-out wheeled bin is the European Union symbol for indicating separate collection for electrical and electronic equipment. This product contains electrical and electronic equipment which should be reused, recycled or recovered and should not be disposed of with unsorted regular waste. Please return the unit or contact the authorised dealer from whom you purchased this product for more information. This product is in conformity with Directive 2011/65/EU Restriction of Hazardous Substances in electrical and electronic equipment.

CE MARK

This product complies with UK Regulation Electrical Equipment (Safety) Regulations 2016, the Electromagnetic Co mpatibility Regulations 2016 and the Ecodesign for Energy-Related Products Regulations 2020 when used and installed according to this instruction manual. For continued compliance only Cambridge Audio accessories should be used with this product and servicing must be referred to qualified service personnel.

EC & UKCA DECLARATION OF CONFORMITY.

Hereby, Audio Partnership PLC declares that this product is in compliance with Directive 2014/53/EU & UK Radio Equipment Regulations 2017, the full text of the CE & UKCA declaration of conformity is available at the following internet address: https://www.cambridgeaudio.com/DoC
Bluetooth Radio Frequency:2.402GHz-2.48 GHz The Max. transmit power: 10dBm.

RCM (REGULATORY COMPLIANCE MARK)

This product meets the Safety, EMC and Radio Communications requirements of the ERAC and ACMA.

VENTILATION

IMPORTANT – The unit will become hot when in use. Do not stack multiple units on top of each other. Do not place in an enclosed area such as a bookcase or in a cabinet without sufficient ventilation. Ensure that small objects do not fall through any ventilation grille. If this happens, switch off immediately, disconnect from the mains supply and contact your dealer for advice. Please ensure there is ample ventilation (at least 20cm clearance on the top, side and rear). Do not put any objects on top of this unit. Do not situate it on a rug or other soft surface and do not obstruct any air inlets or outlet grilles. Do not cover the ventilation grilles with items such as newspapers, tablecloths, curtains, etc.

POSITIONING

Choose the installation location carefully. Avoid placing it in direct sunlight or close to a source of heat. No naked flame sources, such as lighted candles, should be placed on the unit. Also avoid locations subject to vibration and excessive dust, cold or moisture. The unit can be used in a moderate climate. This unit must be installed on a sturdy, level surface. Do not place in a sealed area such as a bookcase or in a cabinet. Do not place the unit on an unstable surface or shelf. The unit may fall, causing serious injury to a child or adult as well as serious damage to the product. Do not place other equipment on top of the unit. Due to stray magnetic fields, turntables or CRT TVs should not be located nearby due to possible interference. Electronic audio components have a running in period of around a week (if used several hours per day). This will allow the new components to settle down and the sonic properties will improve over this time.

POWER SOURCES

The unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power-supply to your home, consult your product dealer or local power company. This unit can be left in Standby mode when not in use and will draw <0.5W in this state. If you do not intend to use this unit for a long period of time, unplug it from the mains socket.

OVERLOADING

Do not overload wall outlets or extension cords as this can result in a risk of fire or electric shock. Overloaded AC outlets, extension cords, frayed power cords, damaged or cracked wire insulation and broken plugs are dangerous. They may result in a shock or fire hazard. Be sure to insert each power cord securely. To prevent hum and noise, do not bundle the interconnect leads with the power cord or speaker leads.

CLEANING

To clean the unit, wipe its case with a dry, lint-free cloth. Do not use any cleaning fluids containing alcohol, ammonia or abrasives. Do not spray an aerosol at or near the unit.

BATTERY DISPOSAL

Batteries may contain substances harmful to the environment. Please dispose of any discharged batteries with due consideration and in accordance with local environmental/electronic recycling guidelines.

SERVICING

These units are not user serviceable. Never attempt to repair, disassemble or reconstruct the unit if there seems to be a problem. A serious electric shock could result if this precautionary measure is ignored. In the event of a problem or failure, please contact your dealer.

Accessories


We offer not only a wide range of HiFi equipment, but also the appropriate accessories.

Skip product gallery
in-akustik Stereo Audio Cable XLR
in-akustik Stereo Audio Cable XLR
Premium XLR cable
For players, amplifiers or active speakers.

Available, delivery time: 1-3 working days *

€63.00 / Piece

nuCable Audio 6
nuCable Audio 6
Stereo RCA Cable
For players, amplifiers or active speakers.

Available, delivery time: 1-3 working days *

€10.00 / Piece

nuCable Audio 9
nuCable Audio 9
High End Stereo RCA Cable
For players, amplifiers or active speakers.

Available, delivery time: 1-3 working days *

€40.00 / Piece

nuCable LS Silverline 2,5 mm²
nuCable LS Silverline 2,5 mm²
Premium speaker cable
For passive speakers.

Available, delivery time: 1-3 working days *

€8.00 / Meter

nuCable LS Studioline Flat 2,5 mm²
nuCable LS Studioline Flat 2,5 mm²
Flat speaker cable
For passive speakers.

Available, delivery time: 1-3 working days *

€36.00 / Piece

Content: 6 Meter (€6.00 / 1 Meter)

Our recommendations


We have many combinations of HiFi devices in our stores in test, our recommendation harmonize in the best possible way. Promised!

Skip product gallery
nuSub XW-800 slim

Average rating of 4.8 out of 5 stars

nuSub XW-800 slim
Slim design low end
This is how inconspicuous subwoofers are today.

Available, delivery time: 1-3 working days *

€585.00 / Piece

nuSub XW-900

Average rating of 5 out of 5 stars

nuSub XW-900
Low end for everyone
Ideal for your home cinema.

Available, delivery time: 1-3 working days *

€695.00 / Piece

Downloads


Technical Information