nuConnect trX 2. Wahl

General Information

Never leave the device unattended when in use

Danger of Electric Shock!

To avoid the risk of electric shock, the device may not be opened by the user. There are no user-serviceable parts inside the device. Service work and repairs are reserved for qualified specialists authorized by Nubert. If you need service, please contact Nubert electronic GmbH directly (info@nubert.de)!

Danger of Suffocation!

Never let children use or play with the speaker or packaging unattended. Ensure that children cannot remove any small parts from the device! These parts could be swallowed and cause suffocation. In case of swallowing any parts, contact a doctor immediately!

Danger of Injury or Damage!

When moving the device, take care to avoid injury and damage!

Caution!

The device can only be completely switched off by disconnecting it from the power supply. Therefore, it must be positioned so that you have free access to either the USB connector on the device or the power supply. If any of the following situations occur, the device must be disconnected from the mains. Contact Nubert electronic GmbH (info@nubert.de) immediately:

• The device has been damaged or has fallen down.
• The power cord or plug is damaged.
• Objects or liquid have entered the device.
• The device has been exposed to excessive moisture or rain.
• The device does not work properly or exhibits a significant reduction in performance.
• The device smells burnt, develops smoke, or makes unusual noises.

Only use accessories recommended by Nubert!

Installation Instructions

Caution!

An unstable location can damage the device.

• Only place the device on a flat, stable surface and make sure that it cannot be knocked over!
• Ensure no unintentional pulling occurs on the cables to avoid knocking over the device or damaging the connection sockets!
• Keep strong mechanical shocks away from the device!

Caution!

Excessive heat buildup inside the unit can shorten its service life or lead to a fire.

• Never cover the device! Ensure sufficient air circulation around the device!
• Do not operate the device near heat sources such as radiators or stoves!
• Do not expose the device to direct sunlight!
• Never place burning candles or similar open fire sources on or near the device!

Danger of Explosion!

Installation in unsuitable locations can cause explosions. Do not use the device:

• In environments where there is a risk of fire or explosion!
• At extremely low or extremely high temperatures!
• Near flammable gases or vapors!
• Near strong dust!
• Near flammable materials!

Danger of Electric Shock!

The device has no special protection against the intrusion of liquids or objects into the system. There is therefore a risk of electric shock.

• Never touch the device with wet hands!
• Only use the device in a dry place!
• Do not operate it outdoors or in damp rooms!
• Protect the device from liquids of all kinds, including dripping and splashing water.
• Do not place containers with liquids (e.g., flower vases) on or near the device!
• If the device is moved from a cold environment to a warm room, condensation may form inside. Wait at least six hours until the device has reached room temperature and is dry before switching it on!
• No objects or foreign bodies may get into the device.
• If the device comes into contact with liquids or objects enter it, disconnect it immediately and contact Nubert electronic GmbH (info@nubert.de)!

General Connection Instructions

• Only insert the USB plug of the power supply cable into USB connectors of intended devices such as computers or USB power supplies! Ensure the device receives 5 V DC from the power source! Do not connect the device to any other power sources!
• Ensure that all connections are correctly made and that all plugs are firmly seated in the connectors before connecting the device to the power source.
• Disconnect the power source before changing any cable connections.
• If you want to disconnect connections on the device, always pull the plug, not the cable!
• Use only the intended cables and connectors! Failure to do so may result in damage or malfunction.
• If the device is not used or is unsupervised for a longer period, disconnect the power source by unplugging the power cable at either the device or the power source!
• Only use cables and accessories recommended by Nubert!

Care and Cleaning Tips

Caution!

Improper handling of the device may result in damage.

• Always disconnect the power supply from the mains before cleaning the device!
• Never use strong cleaning agents or solvents such as petrol, spirit, or similar substances!
• Before recommissioning, ensure all connections are correct, there are no short circuits, and the device and power supply are completely dry.