nuControl X-2
Available from Week 26
€4,490.00 Incl. VAT plus shipping
07171 87 12 0
Product
nuControl X-2
- For the most discerning listeners: Distinctive design and masterful craftsmanship
- User-friendly: Intuitive operation with a German-language interface – via a 6-inch touchscreen or app
- Defining the sound: Nubert Sound Balance and 7-band fully parametric equaliser. An enhanced listening experience with variable high-pass filter, dynamic loudness control and convenient room calibration
- Crystal clear: Absolute signal purity up to 768 kHz/32-bit thanks to premium ESS DAC
- Defined listening pleasure: With high-end bass management and X-Room Calibration Advanced room calibration
- Fully connected: AirPlay 2, Roon Ready, Spotify Lossless, Deezer, Qobuz, Tidal Connect, Bluetooth
The current benchmark
The nuControl X-2 combines a streamer, preamplifier and high-performance DAC in one elegant component. Advanced signal processing, a parametric 7-band EQ and X-Room Calibration Advanced ensure exceptional sound tailored to your room and preferences. A wide range of connections, including RCA, XLR and an MM/MC phono stage, supports virtually any source device. Comprehensive streaming options such as AirPlay 2, Roon, Bluetooth and popular music services provide maximum flexibility. All of this is housed in a timeless designer chassis that blends seamlessly into any living space while making a strong visual statement.
Audiophile Stereo
In a pure stereo setup, the X-2’s concert-like brilliance comes into its own. The room calibration using X-Room Calibration Advanced takes precise account of the room’s acoustic conditions. For the very best music reproduction and a truly enjoyable listening experience.
A New Take on Active Sound
The nuControl X-2 is also the ideal control unit for active speakers. Acting as a central hub, it uses X-Connect to provide all sound settings in high resolution without any additional signal conversion. This allows for perfect control of the sound from active speakers, ensuring the very best playback.
Fully bass-capable
Even without a subwoofer, the bass is already optimally controlled by X-Room Calibration Advanced for detailed reproduction. To enhance the low-frequency performance with a subwoofer, options such as the parametric equaliser, time delays, and high- and low-pass filters offer a wide range of sound adjustments for a personalised listening experience.
Wireless Flexibility
With support for wireless standards such as Wi-Fi, Bluetooth aptX HD/LL and AAC, the nuControl X-2 offers complete freedom when it comes to placement. Our X-Connect HighRes wireless standard also allows for flexible arrangement of your speaker setup within the room – completely wire-free.
Details
High-end signal purity
Absolutely precise, individual signal control and flawless signal transmission to the downstream power electronics are the uncompromising prerequisites for true high-end listening pleasure. The first-class D/A and A/D conversion of the nuControl X-2 and its audiophile design, using only selected high-quality components, provide the perfect foundation for this. Its comprehensive tone control ensures perfect personal listening comfort.
Open to everything
A wide range of interfaces to the digital and analogue worlds make the nuControl X-2 extremely flexible. In addition to RCA, XLR and AES/EBU connections, there is also a USB-B port for connecting to a PC or Mac. For vinyl enthusiasts, a phono input (MM/MC) opens the door to a premium phono preamplifier.
Network-ready – naturally.
Streaming and network connectivity are fully integrated – via Wi-Fi and wired connections. Almost all major music streaming services are supported. Compatibility with Roon and local servers, as well as playback from hard drives or USB sticks, further expand the range of uses. Perfect sound quality is ensured by galvanic isolation of the network connections.
A design that plays on contrasts
The design of the nuControl X-2 deliberately evokes the heyday of the hi-fi era: the proportions and the appearance of its front panels, crafted from high-quality materials, follow in the tradition of sophisticated predecessors in hi-fi electronics. With its minimalist form, the nuControl X-2 builds on its immediate predecessor, but expands on its minimalist design with subtly placed contrasts in form, material and finish to create a look that is particularly well-suited to the home.
Controls – three ways to operate
The nuControl X-2 also sets new standards in terms of ease of use: in addition to the 6-inch touchscreen, it comes with an infrared aluminium remote control and a smartphone app, allowing you to operate all functions intuitively and with quick access.
Fast, high-resolution, touchscreen
The 6-inch touchscreen impresses with direct, intuitive operation on the machine – easy to read, clear and responsive in real time. All information is clearly visible or within easy reach. The logical layout makes controlling the machine just as convenient as using the Control X mobile app from the operator’s seat.
Benchmark: 32-bit/768 kHz
The complete 32-bit signal chain, featuring ESS 9038 PRO audiophile converters, guarantees absolute signal purity of the highest quality and signal processing up to 768 kHz or DSD512. High-end performance for the most demanding requirements. Upsampling is freely selectable.
Absolute signal purity
The analogue and digital sections of the nuControl X-2 are completely isolated from one another and each powered by its own shielded power supply. Sound perfection is further ensured by the analogue volume control, which is controlled digitally via a Cirrus CS3318 chip.
High-end for headphones
The nuControl X-2’s full sound potential can, of course, also be realised with top-class headphones. These can be connected wirelessly or via a cable. For wired connections, pairing is via a 6.3 mm jack or the balanced jack (4.4 mm). High-quality headphone amplifiers from Texas Instruments guarantee perfect sound reproduction here.
The ultimate in vinyl enjoyment
A dedicated premium phono amplifier on a meticulously shielded audio circuit board ensures a vivid reproduction of your vinyl treasures, capturing every nuance. Ultra-short signal paths and direct digitisation effectively minimise noise and ensure a pure, richly detailed sound.
Spatial Sound Calibration 2.0
Sound and space are inextricably linked. Precise room calibration is therefore essential for the ideal sound experience. X-Room Calibration Advanced is an automatic, app-based calibration/room EQ system for iOS and Android devices (for the latter with an optional interface). Its automatic room correction eliminates rumble in the bass/ fundamental frequency range. It delivers even greater resolution and dynamics than the previous system within the control range (-40dB to +18dB at 20 to 300 Hz).
Bass – crisp and precise
Sophisticated bass management with variable slope settings in the low-pass and high-pass filters enables seamless sound integration with the front speakers. A frequency response that can be manually optimised via the bass EQ can be used to counteract room modes. Four separate delay settings for front speakers and subwoofers also ensure ultimate precision in low-frequency timing.
Your ideal sound, perfectly realised
The Nubert Klangwaage puts all the tools you need for a personalised, perfectly tailored and enjoyable listening experience right at your fingertips. Additional features such as automatic loudness control with ear-friendly sound adjustment and the fully parametric 7-band EQ for detailed fine-tuning lay the foundation for pure audio enjoyment in every respect.
Safety Instructions
Nubert electronic GmbH
Nubertstraße 1, 73529 Schwäbisch Gmünd, Deutschland
Email: info@nubert.de Phone: +49 07171 - 8712-0
The entire operating manual, in particular the safety instructions, must be read in full before connecting and commissioning the device. For your own safety, be sure to follow all warnings and safety instructions in this manual and on the device. The user is not permitted to carry out any work on the device other than the described work. Keep this document so that you have access to it at all times. Furthermore, it must also be handed over to possible re-owners.
Intended Use
This device is designed exclusively for sound reproduction in dry rooms. Use the device only as described in this manual. Any other use (particularly safety-relevant or medical use, installation in open environments like IP-certified products) is considered improper and may result in property damage or even personal injury. Nubert electronic GmbH does not assume any liability for damages caused by improper use.
General Information
Never operate the device unattended!
Danger of Electric Shock!
To avoid the risk of electric shock, the device may not be opened by the user. There are no user-serviceable parts inside the device. If you need service, please contact Nubert electronic GmbH directly (info@nubert.de)!
Danger of Suffocation!
Never let children use or play with the device, remote control, or packaging unattended. There is a risk that children will get caught in the packaging film and suffocate. Make sure that children cannot remove any small parts from the devices! These parts, like the remote-control battery, could be swallowed and cause suffocation. In case of swallowing any parts, contact a doctor immediately!
Danger of Injury or Damage!
When moving the device, take care to avoid injury and damage!
Caution!
Since the device can only be completely disconnected from the mains at the mains input on the rear of the unit or by pulling the mains plug from the socket, it must be positioned so that you have free access to the mains input or mains plug. If any of the following situations occurs, the device must be switched off immediately and disconnected from the mains. Contact Nubert electronic GmbH (info@nubert.de) immediately:
- The device has been damaged or has fallen down.
- Power cord or plug is damaged.
- Objects or liquid have gotten into the device.
- The device has been exposed to excessive moisture or rain.
- The device does not work properly or exhibits a significant reduction in performance.
- The device smells burnt, develops smoke, or makes unusual noises.
Only use accessories recommended by Nubert!
Installation Instructions
Caution!
An unstable location can damage the device.
- Only place the device on a flat, stable surface and make sure that it cannot be knocked over!
- Also make sure that no unintentional pulling can occur on the cables to avoid knocking over the device or damaging the connection sockets!
- Keep strong mechanical shocks away from the device!
Caution!
Excessive heat build-up inside the unit can shorten its service life or lead to fire.
- Never cover the device! Make sure that there is a clearance of at least 10 cm and sufficient air circulation around the device!
- Do not operate the device and remote control near heat sources such as radiators or stoves!
- Do not expose the device and remote control to direct sunlight.
- Never place burning candles or similar open fire sources on the device!
Danger of Explosion!
Installation in unsuitable locations can cause explosions. Do not use the device or remote control:
- in environments where there is a risk of fire or explosion!
- at extremely low or extremely high temperatures!
- near flammable gases or vapors!
- near strong dust!
- near flammable materials!
Danger of Electric Shock!
The device carries mains voltage and voltages higher than 35 V AC or DC inside. It has no special protection against the intrusion of liquids or objects into the system. There is therefore a risk of lethal electric shock.
- Never touch the device with wet hands!
- Only use the device in a dry place!
- Do not operate it outdoors or in damp rooms!
- The device must be protected from liquids of all kinds, including dripping and splashing water.
- Do not place any containers containing liquids (e.g., flower vases) on the device or in the immediate vicinity!
- If the device is moved from a cold environment to a warm room, condensation may form inside the unit. Wait at least six hours until the device has reached room temperature and is dry before switching it on!
- No objects of any kind may get into the device.
- Should the device come into contact with liquids or should objects have gotten inside, please unplug the mains plug immediately and contact Nubert electronic GmbH (info@nubert.de)!
Connection Instructions
General Connection Instructions
- Disconnect the mains plug before changing any wiring on the system!
- Make sure that all connections have been made correctly and that all plugs are firmly seated in the sockets before connecting the device to the mains.
- Use only the intended cables or plug connections for the connections! Failure to do so may result in damage or malfunction.
- If you want to disconnect connections on the device, always pull the plug, never the cable!
- Ensure that all plugs are firmly seated in the sockets!
- Only use cables and accessories recommended by Nubert!
Danger of Electric Shock!
Faulty mains supply systems or excessive mains voltage can lead to electric shocks.
- All power supply or antenna systems connected to the device must comply with all applicable laws and regulations and be professionally installed by an approved installation company.
- Use only the appropriate power cord to connect the device. Do not modify the power cord or its plug.
- Make sure that the mains voltage at your location matches the requirements of the device! The correct power supply can be found on the label on the back of the device. It must not be connected to other power supplies.
- Devices of Class 1 construction must be connected to the mains power socket outlet with a protective earth connection. Make sure that the installation of the protective earth is carried out correctly!
- When laying the power cables, make sure that they cannot be damaged (e.g., by heating or mechanical stress)! Pay particular attention to the areas of the connectors and distributors!
Caution!
Overvoltage in the power supply system (e.g., due to lightning) can damage or destroy the device and power supply unit.
- An overvoltage protection element can provide a certain degree of protection against excessively high voltages in the power grid.
- However, the greatest possible protection against damage can only be achieved with the complete separation from the mains supply. In case of thunderstorms or danger of lightning strikes, disconnect the mains cable from the socket and any antenna plugs from your hi-fi system!
- If the device is not used for a long period of time or is unattended, the power supply should be disconnected. Disconnect the mains plug from the socket!
Remote Control and Battery
This product comes with a remote control and a battery. The following must be observed when handling remote controls and batteries:
- If the batteries are discharged, the range of the remote control will decrease significantly. If this happens, replace the batteries immediately.
- Always use high-quality CR2025 lithium button cells as replacement batteries.
- Make sure that the polarity is correct when inserting the battery into the battery compartment!
Caution!
Improper handling can lead to material damage.
- Do not drop the remote control!
- Do not expose the remote control and battery to water or other liquids!
- Do not operate or store the remote control and battery in locations with high humidity or particularly high or low temperature!
Danger!
Leaking or exploding batteries can pose a health hazard and cause damage to goods.
- If you do not use the device for a long time or if the batteries are depleted, remove the batteries from the remote control to prevent discharge, leakage of acid, or explosions.
- Leaking batteries must be replaced immediately.
- If you find a leaking battery, do not touch the leaking material and dispose of the batteries immediately!
- Do not touch leaking batteries!
- Should your skin, eyes, or mouth come into contact with the leaking material, clean the affected area immediately with water and contact a doctor!
Danger! Do Not Ingest Battery, Chemical Burn Hazard!
Ingestion of batteries can cause severe internal burns and death within a short time span.
- Ensure that batteries do not get into your body by any means, in particular that they cannot be swallowed!
- Keep new and used batteries away from children.
- If the battery compartment does not close securely, stop using the product and keep it away from children.
- If you think that batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention!
Care and Cleaning Tips
Caution!
Improper handling of the appliance may result in damage.
- Always unplug the appliance before cleaning it!
- Clean the appliance regularly with a soft, no more than slightly moistened cloth! Mild soapy water can also be used to clean stubborn stains.
- Never use strong cleaning agents or solvents such as petrol, spirit, or similar!
- Before recommissioning, make sure that all connections are correct, that there are no short circuits, and that the device is completely dry.
Accessories
High-quality speakers and hi-fi equipment are our passion. To get the most out of them, you sometimes need the right accessories. That’s why you’ll find everything you need to go with them, from cables to adapters – as you’d expect.
Uncompromising attention to detail
nuElektronik is never off-the-shelf. Audiophile passion is what drives us. To inspire you with outstanding performance, innovative concepts, sophisticated design and fascinating finishes is our mission. Acoustic signal purity is the fundamental requirement: Hi-Fi as honest sound reproduction in the very best sense.
More to it – with Nubert
nuElektronik is developed entirely by us in Schwäbisch Gmünd: the housing, components, sound tuning… Every detail is optimised by our engineers. Series production is consistently monitored by our in-house quality management: sound, technology and appearance are thoroughly checked to ensure you receive perfect products for audiophile enjoyment
Always here for you
Whether before or after your purchase: our customer service team is always on hand to help. If you have any questions about products, your order, returns or installation, our expert support team will be happy to assist – quickly and effortlessly. You can contact us by email or phone, whichever you prefer. Because excellent service makes all the difference.
Listen to it now in our stores!
Test results
We are awarded. And proud of it.
Accessories
We not only build exceptional loudspeakers and electronics, but also offer the matching accessories. So you can find everything useful for our products, from cables to adapters.
Our recommendations
Not the right one? We recommend taking a look at related products that you might like.
Downloads
Reviews
Honest speakers - Honest reviews
Satisfied? Or can we do something better with our products? Then write us your review. Simply log in to your account and write the review of your order here.
Here with us, every review is checked for authenticity and is then approved. So you can be sure that the feedback you give us about our products is genuine.
Technical information
| Device type: | High-end preamplifier |
|---|---|
| Width: | 43,0 cm |
| Height: | 12,5 cm |
| Depth: | 36,5 cm |
| Weight: | 8,8 kg |
| Packaging dimensions (W x H x D): | 54,0 cm x 49,0 cm x 25,0 cm |
| Shipping weight: | 11,2 kg |
| Power consumption in standby mode: | 0,5 W |
| Standard colour: | Black |
| Color: | Black |
| Manufactured in: | China |
| Remote control: | IR remote control |
| App control: | Nubert X-Remote |
| Operation on the device: | Touchscreen and rotary control |
| Digital coaxial inputs: | 2 |
| Digital optical inputs: | 2 |
| USB inputs: | 1x USB type A, 1x USB type B |
| Ethernet: | 1 |
| WIFI: | Yes |
| Bluetooth: | Yes |
| XLR inputs: | 2 |
| Phono input: | 1 (MM / MC) |
| Audio cinch inputs: | 3 |
| AES/EBU inputs: | 1 |
| Digital coaxial outputs: | 1 |
| Digital optical outputs: | 1 |
| USB outputs: | 1x USB type A (power port) |
| XLR outputs: | 1 |
| Audio cinch outputs: | 1 |
| Headphone outputs: | 1x 6.35 mm jack, 1x 4.4 mm jack |
| Audio Pre-Out: | 1 |
| Subwoofer: | 2 |
| Bluetooth version: | Version 5.0 |
| Bluetooth codec: | aptX HD, aptX Low Latency, AAC, SBC |
| Nubert X-Connect: | Send / Receive |
| Bass/treble control: | Adjustable in stages |
| Loudness: | adaptive |
| Calibration system: | X-Room Calibration |
| Equaliser: | Parametric equaliser |